RHS – 10 : It is another high speed Segment based compression coiling machine with Spring manufacturing Capacity extending up to 200 pcs / minute.
Some of the salient features are mentioned below:
It can handle the Wire Diameter ranging from 0.30 mm – 1.0 mm.
Wire Feed of 1 meter per cycle can be taken from the machine.
It can manufacture Conical Spring, Bi – conical spring and Barrel type spring.
With incorporation of magnetic clutch, the initial starting load is reduced on the Main Motor shaft, hence enhancing its life.
The single screw adjustment accommodates and varies the coiling points of the machine at the same time in order to maintain the ratio of the diameter of the spring, hence less adjustment time.
With an optimum design, machine is capable of running for three shifts hence you can meet your orders in least possible time, hence more output in less time.
All the metals used are well chemically treated to intact the machine in the refined state even after years of usage.
All the reputed electricals are used so machine is lesser prone to any breakdowns.
Compression Springs Coiling Machine
RHS – 10 : It is another high speed Segment based compression coiling machine with Spring manufacturing Capacity extending up to 200 pcs / minute. 